You are looking for a rapid, space-saving and custom-made heating element?
You need a heating element which is fast, requires a minimum of space and adjusted to your demands? Then you have come to the right place. We produce thick-film heating elements in our cleanroom from quantities of 1.
Tell us your specifications and we develop a proper heating element.
We produce tubular and flat thick-film heating elements as well as thick-film electronics.
Get to know our thick-film heating elements, the screen printing process and our cleanroom.
Our thick-film heaters are a solution for a variety of applications. As we produce the heating elements according to your specifications we are able to deliver them from quantity 1. The heaters are produced exclusively in Germany, of course with highest degree of quality.
Contact us, we develop a suitable solution for your application!
They can be used as an additional heater for tubes, which are flowed through. Furthermore, the heaters can be used as a tube for liquids, which are to be heated.Learn more
If you are looking for a flat heating element, this can be a solution for you! It is possible to add bores and use an individual contour.Learn more
Thick-film electronics can be used in environments up to 600 °C. Feasible applications are inductors and resistors.Learn more
Thick-film heating elements have a lot of advantages, which can be useful in different applications. Discover the potential of your new heating solution!
Due to the printed thick-film layers and the low thermal mass the heating elements heat up very quickly. Thus, the desired temperature can be reached in a short time with a heating rate of up to 50 K/s.
The result of the screen printing process is a gas-tight layer with a surface similar to glass. Accordingly, the heaters are moisture-resistant and ready for use at any time!
The thick-film heating element can be applied to certain sorts of steel or ceramic. Depending on the application one of both materials is chosen.
A thick-film heating element is designed according to your specifications. Each heating element is as unique as the intended application.
Do you need a thick-film heating element in a hot environment? No problem for them. They work flawlessly at a temperature up to 600 °C.
It is possible to use the heating elements with every voltage. They exhibit a dielectric strength of up to 1.5 kV.
The thick-film components are carefully produced by using the screen printing process in our ISO-class 7 cleanroom.
A big advantage of the screen printing process is the flexibility regarding the layout design.
It is necessary to produce the components in a cleanroom, because the applied layers exhibit only a thickness of a few µm.
Due to a certain composition of the layers a heating element is created, which is resistent to 600 °C.
Get in touch with us, we develop a suitable solution!
Department Manager - Production and Development Thick-film
Research & Development - Thick-film